2015. SPE177073,
This paper describes the selection and evaluation of polymers dedicated to high temperature reservoir conditions (from 85°C to 140°C) using very low salinity brine in comparison with harder brine. A series of rheological, shear and thermal stability tests have been performed to select the most appropriate polymer for each case. The impact of the chemical composition and the microstructure shows that the incorporation of NVP is not necessarily required to ensure stability over 6 months above 100°C in soft brines. Results show as well that ATBS improves shear and thermal stability in both soft and hard brine conditions. Besides, the incorporation of thermo-responsive moieties in the polymer improves viscosity properties resulting in a lower dosage even at high temperature to reach target viscosity.