New Podcast Episode: Injectivity in Polymer Flooding with Randy Seright

🎙️ Episode 2 of the Excel Or Routine Podcast is here: EOR Podcast: Injectivity in Polymer Floods with Randy Seright.

Join me for another 1 hour and 30 minutes of in-depth discussion with Randy Seright, one of the leading experts in Polymer Flooding and Enhanced Oil Recovery (EOR). This episode tackles some of the most critical challenges in polymer floods, including injectivity, reservoir response, fractures, mobility ratio, and simulation accuracy.

Key Topics Covered in This Episode

✅ Injectivity Challenges. Why injectivity is a key hurdle in polymer floods and how to address it.
✅ Reservoir Response & Monitoring. The importance of tracking polymer behavior in real-time.
✅ Fractures & Geomechanics. Their impact on injectivity and sweep efficiency.
✅ Shear-Thickening Effects. When it happens and how it influences polymer flooding performance.
✅ Mobility Ratio Optimization. Strategies to improve oil displacement efficiency.
✅ Reservoir Simulation. Why models often fall short and how to make them more reliable.

📌 Timestamps Available for the video EOR Podcast: Injectivity in Polymer Floods with Randy Seright. For those who prefer to jump directly to specific topics.

Upcoming Episodes

🔜 Next Episode: Laboratory Tests in Polymer Flooding – The good, the bad, the must, and the avoidable.
📅 Coming soon: Special Episode on Polymer Flood Simulation – A discussion about simulation best practices.

Get Involved!

This podcast is designed to be a knowledge-sharing platform for the EOR and polymer flooding community. If you have ideas, comments, or want to participate, don’t hesitate to reach out!

Keywords:

Polymer Flooding, Injectivity in Polymer EOR, EOR Podcast, Enhanced Oil Recovery, Reservoir Simulation, Mobility Ratio, Fractures in EOR, Shear-Thickening, Polymer Flooding Challenges

Here’s another video on the injectivity topic, providing a great introduction on the matter.

Check the video playlist o the YouTube channel.